Diamond Cargo Trailer Options:
| JACKS, COUPLERS, AND TONGUES: | |
| SCISSOR JACK 5K w/ HANDLE (PAIR) | $188.50 |
| SIDEWIND JACK (ILO STANDARD) | $39.00 |
| 2K BULLDOG JACK | $97.50 |
| 5K BULLDOG JACK | $143.00 |
| BULLDOG 2 5/16″ COUPLER (ILO STANDARD) | $169.00 |
| BULLDOG 2″ COUPLER (ILO STANDARD) | $195.00 |
| 2-5/16″ COUPLER ILO 2″ (SINGLE IDLER AXLES ONLY) | $32.50 |
| ADJUSTABLE 2 5/16″ COUPLER (ILO STANDARD) | $208.00 |
| ADJUSTABLE PINTLE EYE COUPLER (ILO STANDARD) | $201.50 |
| DETACHABLE TONGUE w/ 5K JACK (REQUIRES FLAT FRONT & STABILIZERS ON ALL CORNERS) | $650.00 |
| 7000# DROP LEG TONGUE JACK ILO STD **CANNOT SHIP ON WEDGE -SEE BELOW** | $130.00 |
| 7000# SIDEWIND SWING UP DROP LEG JACK (REMOVABLE) *USE IF SHIPPING ON WEDGE* | $227.50 |
| *** 7000# JACK REQ’S EXTENDED TRIPLE TUBE TONGUE | |
| REAR DROP DOWN JACKS 3K (PAIR) | $182.00 |
| *48″ TRIPLE TUBE TONGUE | $130.00 |
| *60″ TRIPLE TUBE TONGUE (UP TO 24′) (6″ FRAME) | $156.00 |
| *60″ TRIPLE TUBE TONGUE (8.5X26′ & UP) (8″ FRAME) | $221.00 |
| *72″ TRIPLE TUBE TONGUE W/110″ DRAWBARS (UP TO 24′) (6″ FRAME) | $240.50 |
| *72″ TRIPLE TUBE TONGUE W/110″ DRAWBARS (8.5’X26′ & UP) (8″ FRAME) | $344.50 |
| *ALL TRIPLE TUBE TONGUES REQUIRE 2-5/16″ COUPLER (N/A ON 4′ WIDES) | |
| ELECTRIC TONGUE JACK 3500 LB w/ BATTERY | $487.50 |
| ATP PLATFORM ON TONGUE (REQ’S FLAT FRONT W/TRIPLE TUBE TONGUE OR EXTENDED TRIPLE TUBE TONGUE) | $227.50 |
| SWING UP JACK ILO STANDARD (REQ’S EITHER EXTENDED TRIPLE TUBE TONGUE OR FLAT FRONT) | $227.50 |
| TONGUE JACK CASTER WHEEL (SHIP LOOSE ONLY) | $32.50 |
| 5K TOPWIND JACK | $97.50 |
| TIE DOWNS & STABILIZERS | |
| FOLD DOWN STABILIZER JACKS (PAIR) | $84.50 |
| WALL MOUNT D-RINGS -PER EA | $15.60 |
| FLOOR MOUNT D-RINGS (STEEL BACKER) -PER EA | $15.60 |
| WALL E-TRACK -PER FT | $10.40 |
| FLOOR E-TRACK -PER FT | $10.40 |
| SMALL SECTION E-TRACK (1′-3′) (FLOOR OR WALL) -PER SECTION | $32.50 |
| REMOVEABLE MOTORCYLE WHEEL CHOCK -PER EA | $65.00 |
| WHEEL / WHEEL CAPS | |
| RADIAL SILVER MODS OR WHITE SPOKE | $0.00 |
| UPGRADE TO BLACK STEEL RIMS -PER TIRE ($10 PER AXLE) | $6.50 |
| UPGRADE TO ALUMINUM MAGS: STAR / SPIDER: | |
| 15″ 5-LUG SINGLE AXLE | $390.00 |
| 15″ 5-LUG TANDEM AXLE | $773.50 |
| 15″ 6-LUG SINGLE AXLE | $390.00 |
| 15″ 6-LUG TANDEM AXLE | $773.50 |
| 15″ 6-LUG TRIPLE AXLE | $1,040.00 |
| 16″ 8-LUG SINGLE AXLE | $780.00 |
| 16″ 8-LUG TANDEM AXLE | $1,547.00 |
| 16″ 8-LUG TRIPLE AXLE | $2,320.50 |
| CHROME CENTER CAP TANDEM 5 AND 6 LUG STEEL TIRE ONLY | $52.00 |
| CHROME CENTER CAP SINGLE 5 AND 6 LUG STEEL TIRE ONLY | $26.00 |
| BLACK CENTER CAP TANDEM 5 AND 6 LUG STEEL TIRE ONLY | $52.00 |
| BLACK CENTER CAP SINGLE 5 AND 6 LUG STEEL TIRE ONLY | $26.00 |
| CHROME CENTER CAP TANDEM 8 LUG STEEL TIRE ONLY | $78.00 |
| BOGEY WHEELS 6″ (2 PER SET) | $234.00 |
| BOGEY WHEELS 10″ (2 PER SET) | $338.00 |
| SPARE TIRES: | |
| 13″ 5-LUG 175/80R13 SILVER MOD/WHITE SPOKE | $169.00 |
| 13″ 5-LUG 175/80R13 BLACK SPOKE | $182.00 |
| 15″ 5-LUG 205/75R15 SILVER MOD/WHITE SPOKE | $182.00 |
| 15″ 5-LUG 205/75R15 BLACK SPOKE | $195.00 |
| 15″ 5-LUG 205/75R15 ALUMINUM MAG STAR / SPIDER | $377.00 |
| 15″ 6-LUG 225/75R15 SILVER MOD/WHITE SPOKE | $214.50 |
| 15″ 6-LUG 225/75R15 BLACK SPOKE | $227.50 |
| 15″ 6-LUG 225/75R15 ALUMINUM MAG STAR / SPIDER | $383.50 |
| 16″ 8-LUG 235/80R16 SILVER MOD/WHITE SPOKE | $357.50 |
| 16″ 8-LUG 235/80R16 BLACK SPOKE | $370.50 |
| 16″ 8-LUG 235/80R16 ALUMINUM MAGS STAR / SPIDER | $643.50 |
| SPARE TIRE MOUNT ON TONGUE/INSIDE (ON TONGUE REQ’S: FF W/TT OR EXTENDED TRIPLE TUBE) | $84.50 |
| AXLE UPGRADES | |
| ** REQUEST PRICE QUOTE FOR ANY SIZE DIFFERENT THAN LISTED ** | |
| ** STRAIGHT AXLES ARE SAME COST AS SAME SIZE DROP SPRING ** | |
| ** NARROW TRACK AXLE(S) (6′ & 7′ WIDES ONLY) | $448.50 |
| SPREAD AXLES w/ ANGLED SIDES & CORVETTE FENDERS (TA AXLE) (REQUIRES TORSIONS) | $325.00 |
| SPREAD AXLES w/ ANGLED SIDES & CORVETTE FENDERS (TRIPLE AXLE) (REQUIRES TORSIONS) | $487.50 |
| 5′ WIDE SINGLE AXLES UPGRADE FROM SINGLE 3500 DROP IDLER (2990# GVWR): |
|
| SINGLE 3500 DROP SPRING W/E.B. & 2-5/16 COUPLER | $253.50 |
| SINGLE 3500 TORSION W/E.B. & 2-5/16 COUPLER | $702.00 |
| 6′ WIDE SINGLE AXLES UPGRADE FROM SINGLE 3500 DROP IDLER (2990# GVWR): |
|
| SINGLE 3500 DROP SPRING W/E.B. & 2-5/16 COUPLER | $253.50 |
| SINGLE 3500 TORSION W/E.B. & 2-5/16 COUPLER | $702.00 |
| SINGLE 5200 DROP SPRING W/E.B., 2-5/16 COUPLER, TTT & 6″ 11ga TUBE MAIN FRAME | $1,235.00 |
| SINGLE 5200 TORSION W/E.B., 2-5/16 COUPLER, TTT & 6″ 11ga TUBE MAIN FRAME | $1,709.50 |
| 7′ WIDE SINGLE AXLES UPGRADE FROM SINGLE 3500 DROP IDLER (2990# GVWR): |
|
| SINGLE 3500 DROP SPRING W/E.B. & 2-5/16 COUPLER | $247.00 |
| SINGLE 3500 TORSION W/E.B. & 2-5/16 COUPLER | $695.50 |
| SINGLE 5200 DROP SPRING W/E.B., 2-5/16 COUPLER, TTT & 6″ 11ga TUBE MAIN FRAME | $1,228.50 |
| SINGLE 5200 TORSION W/E.B., 2-5/16 COUPLER, TTT & 6″ 11ga TUBE MAIN FRAME | $1,703.00 |
| SINGLE 7000 DROP SPRING W/E.B., 2-5/16 COUPLER, TTT & 6″ TUBE MAIN FRAME | $1,501.50 |
| SINGLE 7000 TORSION W/E.B., 2-5/16 COUPLER, TTT & 6″ TUBE MAIN FRAME | $1,943.50 |
| TANDEM AXLES (6′ WIDE – 7X14TA) UPGRADE FROM TANDEM 3500 DROP SPRING: |
|
| TANDEM 3500 TORSION W/E.B. | $910.00 |
| TANDEM 5200 DROP SPRING W/E.B., TTT & 6″ 11ga TUBE MAIN FRAME | $1,378.00 |
| TANDEM 5200 TORSION W/E.B., TTT & 6″ 11ga TUBE MAIN FRAME | $2,333.50 |
| TANDEM 7000 DROP SPRING W/E.B., TTT, 5K JACK & 6″ 11ga TUBE MAIN FRAME (N/A ON 6′ WIDES) | $1,917.50 |
| TANDEM 7000 TORSION W/E.B., TTT, 5K JACK & 6″ 11ga TUBE MAIN FRAME (N/A ON 6′ WIDES) | $2,801.50 |
| TANDEM AXLES (7X16TA – 8.5X24TA) UPGRADE FROM TANDEM 3500 DROP SPRING: |
|
| TANDEM 3500 TORSION W/E.B. | $910.00 |
| TANDEM 5200 DROP SPRING W/E.B. & TTT | $903.50 |
| TANDEM 5200 TORSION W/E.B. & TTT | $1,865.50 |
| TANDEM 7000 DROP SPRING W/E.B., TTT & 5K JACK | $1,443.00 |
| TANDEM 7000 TORSION W/E.B., TTT & 5K JACK | $2,333.50 |
| TANDEM AXLES (8.5X26′ & UP) UPGRADE FROM TANDEM 5200 DROP SPRING: |
|
| TANDEM 5200 TORSION W/E.B. | $962.00 |
| TANDEM 7000 DROP SPRING W/E.B. | $598.00 |
| TANDEM 7000 TORSION W/E.B. | $1,417.00 |
| TRIPLE AXLES (8.5′ UP TO 24′) UPGRADE FROM TANDEM 3500 DROP SPRING: **REQUIRES 8″ MAIN FRAME (NOT INCLUDED IN PRICE)** |
|
| TRIPLE 5200 DROP SPRING W/E.B., TTT, 21K COUPLER & 5K JACK | $2,658.50 |
| TRIPLE 5200 TORSION W/E.B., TTT, 21K COUPLER & 5K JACK | $4,095.00 |
| TRIPLE 7000 DROP SPRING W/E.B., TTT, 21K COUPLER & 5K JACK | $3,451.50 |
| TRIPLE 7000 TORSION W/E.B., TTT, 21K COUPLER & 5K JACK | $4,777.50 |
| TRIPLE AXLES (8.5X26′ & UP) UPGRADE FROM TANDEM 5200 DROP SPRING: |
|
| TRIPLE 5200 DROP SPRING W/E.B. & 21K COUPLER | $1,748.50 |
| TRIPLE 5200 TORSION W/E.B. & 21K COUPLER | $3,178.50 |
| TRIPLE 7000 DROP SPRING W/E.B. & 21K COUPLER | $2,535.00 |
| TRIPLE 7000 TORSION W/E.B. & 21K COUPLER | $3,867.50 |
| TRIPLE AXLES (8.5X34 ONLY) UPGRADE FROM TRIPLE 5200 DROP SPRING: |
|
| TRIPLE 5200 TORSION W/E.B. | $1,612.00 |
| TRIPLE 7000 DROP SPRING W/E.B. | $942.50 |
| TRIPLE 7000 TORSION W/E.B. | $2,125.50 |
| TRANSITIONAL FLAP AND RAMPS: | |
| STEEL TRANSITION FLAP (PAINTED BLACK) | $162.50 |
| 36″ FLAP w/ ATP SUPPORTS AND 3″ BUMPERS **(REQUIRES SUPER DUTY RAMP UPGRADE)** | $331.50 |
| DOUBLE SPRING ASSIST (8.5′ WIDES ONLY) ** MUST GET SUPER DUTY RAMP UPGRADE ** | N/A |
| WHEEL WELL RAMPS 24″ X 16′ w/ ATP OR RTP | $1,592.50 |
| WHEEL WELL RAMPS 24″ X 18′ w/ ATP OR RTP | $1,716.00 |
| WHEEL WELL RAMPS 24″ X 20′ w/ ATP OR RTP | $1,839.50 |
| *** 30″ WIDE ADD $200 | |
| EXTRA REAR RAMP HINGE / DOUBLE DOOR HINGE – INSTALLED -PER EA | $13.00 |
| ATP ON 16″ FLAP ONLY | $130.00 |
| WIDE ENTRY RAMP DOOR (95″ WIDE) (8.5′ WIDES ONLY) **(REQUIRES STRIP TAIL LIGHTS)** | $260.00 |
| WINCH AND GENERATOR BOXES: | |
| WINCH | |
| WINCH PLATE | $65.00 |
| ATP GENERATOR BOX ON TONGUE (REQUIRES FLAT FRONT & EXTENDED TONGUE) | $650.00 |
| *** BOX SIZE: 30″H X 36″W X 24″D -GET QUOTE FOR LARGER BOX | |
| INSULATED GENERATOR COMPARTMENT w/ EXTERIOR DOOR, SLIDES AND TRAY | $650.00 |
| *** BOX SIZE: 34″H X 36″W X 24″D -GET QUOTE FOR LARGER BOX | |
| COVER INSULATED GENERATOR COMPARTMENT IN ATP | $130.00 |
| GENERATOR SLIDES AND TRAY ONLY – NO BOX – FOR 36″ WIDE DOOR (ADD PRICE FOR DOOR) | $286.00 |
| ATP BATTERY BOX | $162.50 |
| INTERIOR PARTITION WALLS (PRICE FOR 8.5 WIDES): | |
| 3/8″ PLYWOOD FINISH 2 X 3 STUDS | $455.00 |
| 3/4″ PLYWOOD FINISH 2 X 3 STUDS | $552.50 |
| ADD 24″ RESIDENTIAL STYLE DOOR TO INTERIOR PARTITION WALL | $292.50 |
| INTERIOR SIDE WALLS, CEILING AND FLOORS: | |
| FLOOR COVERINGS – ATP/RTP/RUBBER COIN/BLACK & WHITE TILE/SLATE TILE -PER FT | $28.60 |
| **CAUTION: TILE FLOOR CAN BE SLIPPERY! DIAMOND CARGO NOT LIABLE FOR SLIPS OR FALLS | |
| ATP/RTP/COIN RAMP & FLAP | $208.00 |
| .024 METAL ON WALLS -PER LTF | $31.20 |
| .024 METAL ON CEILING -PER LTF | $23.40 |
| .030 METAL ON WALLS -PER LTF | $44.20 |
| .030 METAL ON CEILING -PER LTF | $36.40 |
| CEILING COVE W/J-RAIL – PER LTF | $13.00 |
| WHITE VINYL CEILING -PER LTF | $19.50 |
| WHITE VINYL WALLS -PER LTF | $29.90 |
| RAW LUAN CEILING -PER LTF | $10.40 |
| ATP CEILING -PER LTF | $39.00 |
| R-FOIL CEILING INSULATION **(REQUIRES CEILING LINER)** -PER FT | $14.30 |
| R-FOIL WALL INSULATION -PER LTF | $18.20 |
| FLOOR INSULATION (R-FOIL W/SHEET METAL BETWEEN FRAME & PLYWOOD FLOOR) -PER FT | $28.60 |
| 3/4″ PLYWOOD WALLS (ILO STANDARD) -PRICE PER LTF | $28.60 |
| 3/4″ PRESSURE TREATED PLYWOOD WALLS (ILO STANDARD) -PRICE PER LTF | $35.10 |
| 3/4″ PLYWOOD 24″ KICK PLATE -PRICE PER LTF | $26.00 |
| 3/4″ PLYWOOD 12″ KICK PLATE -PRICE PER LTF | $15.60 |
| 3/8″ PLYWOOD ON CEILING -PRICE PER LTF **(REQUIRES 16″ OC ROOF BOWS)** | $28.60 |
| 12″ ATP OR RTP KICK PLATE -PRICE PER LTF | $15.60 |
| 36″ GRAY INDOOR-OUTDOOR CARPET ON WALLS -PRICE PER LTF | $32.50 |
| **CARPET N/A ON FULL WALLS & FLOOR | |
| DOUBLE 3/4″ PLYWOOD FLOORS -PRICE PER LTF | $32.50 |
| **3/4″ PRESSURE TREATED PLYWOOD FLOORS (ILO STANDARD) -PRICE PER LTF | $32.50 |
| **DOUBLE 3/4″ PRESSURE TREATED PLYWOOD FLOORS (ILO STANDARD) -PRICE PER LTF | $52.00 |
| **3/4″ PRESSURE TREATED PLYWOOD RAMP & FLAP (NOT INCLUDED W/ABOVE) | $208.00 |
| **FLOOR COVERING ON PRESSURE TREATED PLYWOOD NOT AVAILABLE | |
| ATP COVERED WHEEL WELLS | $130.00 |
| LIGHTING AND ELECTRICAL: | |
| 12V ANGLED RACING LED EXTERIOR LIGHT -EA | $175.50 |
| 12V 24″ FLAT PANEL LED (WITH CEILING LINER) -EA | $78.00 |
| 110V 24″ FLAT PANEL LED (WITH CEILING LINER) -EA | $78.00 |
| 12V 24″ FLAT PANEL LED W/BACKER (**IF NO CEILING LINER**) -EA | $110.50 |
| 110V 24″ FLAT PANEL LED W/BACKER (**IF NO CEILING LINER**) -EA | $110.50 |
| 12V LED ROPE LIGHTING -PRICE PER FT | $13.00 |
| 110V 48″ LED INTERIOR LIGHT -EA | $123.50 |
| 110V 48″ LED INTERIOR LIGHT ILO 24″ FLAT PANEL -EA | $45.50 |
| KEMPER 12V 4′ LED STRIP INTERIOR LIGHT -EA | $78.00 |
| 7-WAY PLUG ONLY (REQ’D FOR BACKUP LIGHTS ON SINGLE AXLE & REQ’S 2-5/16″ COUPLER) | $26.00 |
| 30 AMP MOTOR BASE PLUG W/TWIST LOCK CORD ILO LIFELINE | $162.50 |
| 50 AMP MOTOR BASE PLUG W/TWIST LOCK CORD ILO LIFELINE | $299.00 |
| EXTERIOR LED LOADING LIGHT 12V -PER EA | $104.00 |
| DUAL LED TAIL LIGHTS (PAIR) | $52.00 |
| 12V NON-LED DOME LIGHT -PER EA | $19.50 |
| LED DOME LIGHT – PER EA | $32.50 |
| LED DOME LIGHT (ILO STANDARD) | $28.60 |
| **TO MOVE DOME LIGHT(S) TO CEILING REQ’S 12V WALL SWITCH-SEE BELOW | |
| LED BACK UP LIGHTS (REVERSE TAIL) (PAIR) SPECIFY: ALL-IN-ONE COMBO, SURFACE MOUNT OR STRIP COMBO | $78.00 |
| **LED BACK UP LIGHTS SINGLE AXLE MUST ADD 7-WAY PLUG & 2-5/16″ COUPLER (SEE ABOVE) | |
| 110 VOLT TO 12 VOLT CONVERTER/CHARGER 45 AMP DC | $299.00 |
| LED 12V PORCH LIGHT WITH SWITCH | $104.00 |
| LED 110V PORCH LIGHT WITH SWITCH | $104.00 |
| TURN SIGNAL LED (PAIR) | $39.00 |
| 110V INTERIOR RECEPTACLE (15 AMP) -PER EA | $32.50 |
| 110V GFI RECEPTACLE INTERIOR/EXTERIOR (15 AMP) -PER EA | $45.50 |
| 110V INTERIOR SWITCH (2-WAY) | $26.00 |
| 60 AMP PANEL BOX W/25′ LIFELINE (UP TO (3) 20 AMP BREAKERS) (SPECIFY: 30 AMP OR 50 AMP SERVICE) | $221.00 |
| 100 AMP PANEL BOX (SPECIFY: 30 AMP OR 50 AMP SERVICE) | $351.00 |
| **PANEL BOX ONLY PRICING DOES NOT INCLUDE WIRING – GET QUOTE FOR WIRING UPCHARGE | |
| UPGRADE FROM 60 AMP TO 100 AMP PANEL BOX (SPECIFY 30 AMP OR 50 AMP SERVICE) | $130.00 |
| 15 AMP MOTORBASE PLUG (UP TO (2) RECEPTS OR (1) GFI – NOT INCLUDED IN PRICE) | $162.50 |
| DEDICATED BREAKER (DOES NOT INCL RECEPT) | $32.50 |
| 12V 2-WAY WALL SWITCH | $32.50 |
| 12V 3-WAY WALL SWITCH | $65.00 |
| 110V 3-WAY WALL SWITCH | $97.50 |
| 12V OR 110V STUB-OUT | $65.00 |
| 220V STUB-OUT | $130.00 |
| SNAKESKIN -PER LTF | $3.90 |
| 12V DEEP CYCLE BATTERY w/ BLACK PLASTIC BOX (REQ’S 7-WAY PLUG) | $195.00 |
| 12V SOLAR TRICKLE CHARGER (FOR BATTERY) | $383.50 |
| ADDITIONAL (EXTRA) EXTERIOR MARKER LIGHTS -PER EA | $10.40 |
| LED STRIP TAIL LIGHTS (PAIR) | $39.00 |
| SHELVES: (SINGLE SHELF MAX LENGTH: 8′) | |
| 30″ DEEP WRAPPED IN ALUMINUM w/ FOLD DOWN BRACKETS -PRICE PER FT | $32.50 |
| 24″ DEEP WRAPPED IN ALUMINUM w/ FOLD DOWN BRACKETS -PRICE PER FT | $29.90 |
| 12″ DEEP WRAPPED IN ALUMINUM w/ FOLD DOWN BRACKETS -PRICE PER FT | $27.30 |
| 30″ DEEP WRAPPED IN ALUMINUM w/ STATIONARY LEGS -PRICE PER FT | $35.10 |
| 24″ DEEP WRAPPED IN ALUMINUM w/ STATIONARY LEGS -PRICE PER FT | $32.50 |
| 12″ DEEP WRAPPED IN ALUMINUM w/ STATIONARY LEGS -PRICE PER FT | $29.90 |
| PLYWOOD SHELF IN V-NOSE (ANY MODEL SIZE) | $227.50 |
| PLYWOOD SHELF IN V-NOSE COVERED IN .024 METAL (ANY MODEL SIZE) (SPEICIFY .024 COLOR) | $260.00 |
| EXTERIOR AND TRIM OPTIONS: | |
| SEMI-SCREWLESS EXTERIOR (SCREWED ON SEAMS ONLY) | STD |
| SMOOTH SCREWLESS EXTERIOR (REQ’S UPGRADE TO MIN OF .030)-PER LTF *NO LONGER AVAILABLE* | N/A |
| .024 ALUM EXTERIOR METAL | STD |
| COLOR CHOICES: WHITE, BLACK, ARIZONA BEIGE, CHARCOAL GREY, SILVER FROST, RED, PEWTER | |
| .030 ALUM EXTERIOR METAL -PER LTF | $13.00 |
| **COLOR CHOICES: WHITE, BLACK, ARIZONA BEIGE, CHARCOAL GREY, SILVER FROST, RED, PEWTER, INDIGO BLUE, BRANDYWINE, EMERALD GREEN | |
| .030 SPECIALTY ALUM EXTERIOR METAL -PER LTF | $18.20 |
| **COLOR CHOICES: ELEC BLUE, ELEC GREEN, MATTE BLACK, YELLOW, ORANGE, DOVE GREY | |
| .040 METAL ILO .024 -PRICE PER LTF (WHITE OR BLACK ONLY) | $23.40 |
| .050 METAL ILO .024 -PRICE PER LTF (WHITE OR BLACK ONLY) | $46.80 |
| .080 POLYCORE (REQ’S ATP OR ANODIZED FRONT & REAR CORNERS) | $26.00 |
| **COLOR CHOICES: WHITE, BLACK, ORANGE, GREEN, BLUE, YELLOW, CHARCOAL, SILVER, RED *** CALL FOR AVAILABILITY *** N/A W/ 2-TONE OR 3-TONE OPTIONS |
|
| **POLYCORE HEIGHT: 8′ INTERIOR REQ’S MIN OF 12″ TRIM SIDES/REAR ($12 PER LTF) / 8’6″ INTERIOR OR HIGHER REQ’S SCRAP POLYCORE COVERED W/24″ TRIM SIDES/REAR ($20 PER LTF) | |
| ATP OR ANODIZED FRONT CORNERS | $97.50 |
| ATP OR ANODIZED REAR CORNERS & HEADER | $97.50 |
| CAST ALUMINUM FRONT AND REAR CORNERS w/ ANODIZED INSERT *CURRENTLY UNAVAILABLE* | N/A |
| 3″ BOTTOM TRIM (ILO STANDARD) -PER LTF | $3.90 |
| REFLECTOR (DOT) TAPE -PER LTF (STANDARD: 28′ OR LARGER AND/OR 7000 LB. AXLES) | $5.20 |
| 2 TONE w/ SLANTED ANODIZED/ATP DIVIDER (.030 UPGRADE NOT INCL) | $195.00 |
| 2 TONE w/ 24″-48″ SLANTED ATP SIDES/REAR -PRICE PER LTF (.030 UPGRADE NOT INCL) | $26.00 |
| *IF GETTING MOTORCYCLE PKG -PRICE PER LTF | $13.00 |
| 3 TONE w/ 24″-48″ SLANTED ATP SIDES/REAR -PRICE PER LTF (.030 UPGRADE NOT INCL) | $32.50 |
| *IF GETTING MOTORCYCLE PKG -PRICE PER LTF | $19.50 |
| SLANTED STONEGUARD | $32.50 |
| UPGRADE TO ATP FENDERS (ALL SIZES) | $58.50 |
| UPGRADE TO BLACK ATP FENDERS (ALL SIZES) (INCL W/BLACKOUT PKG) | $110.50 |
| 24″ ANODIZED/ATP/COLORED METAL SIDES & REAR -PER LTF | $20.80 |
| 12″ ANODIZED/ATP/COLORED METAL SIDES & REAR -PER LTF | $15.60 |
| BLACK ATP STONEGUARD & NOSEGUARD | $32.50 |
| STANDARD WINDOWS: | |
| 15″w X 30″h VERTICAL SLIDER | $214.50 |
| 30″w X 15″h HORIZONTAL SLIDER | $214.50 |
| 30″w X 30″h HORIZONTAL SLIDER | $273.00 |
| 30″w X 30″h EGRESS | $455.00 |
| DOORS: | |
| ** ANY SIZE DOOR NOT LISTED, UPCHARGE FOR CUSTOM SIZE/COLOR DOOR – PER EA DOOR | $91.00 |
| MOVE SIDE DOOR TO V-NOSE | $65.00 |
| 32″/36″/48″ SINGLE REAR DOOR ILO RAMP & FLAP (DELETES BEAVERTAIL ON 8.5′ WIDES) | N/C |
| DOUBLE REAR DOORS ILO RAMP & FLAP (DELETES BEAVERTAIL ON 8.5′ WIDES) | N/C |
| SOLID REAR WALL ILO RAMP (DELETES BEAVERTAIL ON 8.5′ WIDES) | N/C |
| UPGRADE TO 36″ SIDE DOOR ILO 32″ (6′ & 7′ WIDES) | $78.00 |
| UPGRADE TO 48″ SIDE DOOR ILO 32″ (6′ & 7′ WIDES) | $175.50 |
| UPGRADE TO 48″ SIDE DOOR ILO 36″ (8′ & 8.5′ WIDES) | $97.50 |
| 54×48 ESCAPE DOOR | $422.50 |
| ** ADD BLACK FRAME TO ESCAPE DOOR | $110.50 |
| 24″ FACTORY BUILT SIDE DOOR W/BAR LOCK (5′ WIDES) | $149.50 |
| BAR LOCK ON SIDE DOOR (N/A ON ESCAPE DOOR & RV DOOR W/FULL SCREEN) | $45.50 |
| CONCESSION DOORS: | |
| 48 X 36 (3X4) | $884.00 |
| 60 X 36 (3X5) | $903.50 |
| 72 X 36 (3X6) | $955.50 |
| 96 X 36 (3X8) | $1,072.50 |
| 60 X 48 (4X5) | $1,020.50 |
| 72 X 48 (4X6) | $1,020.50 |
| 96 X 48 (4X8) | $1,384.50 |
| ADD BLACK FRAME TO 48″ WIDE TO 60″ WIDE | $201.50 |
| ADD BLACK FRAME TO 72″ WIDE TO 96″ WIDE | $227.50 |
| ADD MARQUEE – NO LONGER AVAILABLE | N/A |
| CONCESSION DOOR W/GLASS & SCREEN: | |
| 48 X 36 (3X4) | $1,826.50 |
| 60 X 36 (3X5) | $1,852.50 |
| 72 X 36 (3X6) | $1,859.00 |
| 96 X 36 (3X8) | $2,554.50 |
| 60 X 48 (4X5) | $2,138.50 |
| 72 X 48 (4X6) | $2,138.50 |
| 96 X 48 (4X8) | $2,899.00 |
| ADD BLACK FRAME TO 48″ WIDE TO 60″ WIDE | $201.50 |
| ADD BLACK FRAME TO 72″ WIDE TO 96″ WIDE | $227.50 |
| ADD MARQUEE – NO LONGER AVAILABLE | N/A |
| DOUBLE SIDE DOOR ILO STANDARD: | |
| 60 X 78 DOUBLE SIDE DOOR ILO STD – ELIXIR DOOR | $487.50 |
| 72 X 78 DOUBLE SIDE DOOR ILO STD – ELIXIR DOOR | $526.50 |
| 60 X 78 DOUBLE SIDE DOOR ILO STD – FACTORY DOOR (CANNOT GET STEPWELL) | $474.50 |
| 72 X 78 DOUBLE SIDE DOOR ILO STD – FACTORY DOOR (CANNOT GET STEPWELL) | $474.50 |
| BLACK FRAME DOORS ADD | $195.00 |
| DOUBLE SIDE DOOR EXTRA: | |
| 60 X 78 DOUBLE SIDE DOOR – ELIXIR DOOR | $812.50 |
| 72 X 78 DOUBLE SIDE DOOR – ELIXIR DOOR | $845.00 |
| 60 X 78 DOUBLE SIDE DOOR – FACTORY DOOR (CANNOT GET STEPWELL) | $598.00 |
| 72 X 78 DOUBLE SIDE DOOR – FACTORY DOOR (CANNOT GET STEPWELL) | $656.50 |
| BLACK FRAME DOORS ADD | $195.00 |
| BAGGAGE OR ACCESS DOORS: | |
| 36″ X 24″ w/ CAM LOCK | $312.00 |
| 36″ X 36″ w/ CAM LOCK | $325.00 |
| 48″ X 36″ w/ CAM LOCK | $325.00 |
| BLACK FRAME DOORS ADD | $65.00 |
| GENERATOR DOORS: | |
| 36″ X 24″ w/ VENT AND CAM LOCK | $312.00 |
| 36″ X 34″ w/ VENT AND CAM LOCK (STANDARD SIZE) | $325.00 |
| 36″ X 36″ w/ VENT AND CAM LOCK | $325.00 |
| 40″ X 32″ w/ VENT AND CAM LOCK | $344.50 |
| BLACK FRAME DOORS ADD | $65.00 |
| FUEL DOORS: | |
| 12″ X 12″ ALUMINUM w/ LOCK | $162.50 |
| BLACK FRAME DOORS ADD | $65.00 |
| RV DOOR AND CARGO DOORS: | |
| RV TYPE 32″ X 66″ w/ WINDOW AND FULL SCREEN DOOR (ILO STANDARD) BLACK OR WHITE | $929.50 |
| RV TYPE 36″ X 78″ w/ WINDOW AND FULL SCREEN DOOR (ILO STANDARD) BLACK OR WHITE | $955.50 |
| RV TYPE 48″ X 78″ w/ WINDOW AND FULL SCREEN DOOR (ILO STANDARD) BLACK OR WHITE | $1,007.50 |
| *** FOR COLOR ADD $10.00 | |
| EXTRA DOORS: | |
| 24″ SIDE DOOR W/FLUSH LOCK (SIZES: 24×54, 24×60, 24×66, 24×72, 24×78) | $364.00 |
| 24″ X 84″ SIDE DOOR W/FLUSH LOCK | $435.50 |
| 32″ X 60″ OR 32″ X 66″ SIDE DOOR W/FLUSH LOCK | $377.00 |
| 32″ X 72″ OR 32″ X 78″ SIDE DOOR W/FLUSH LOCK | $416.00 |
| 32″ X 84″ SIDE DOOR W/FLUSH LOCK | $552.50 |
| 36″ X 66″ OR 36″ X 72″ SIDE DOOR W/FLUSH LOCK | $409.50 |
| 36″ X 78″ SIDE DOOR W/FLUSH LOCK | $416.00 |
| 36″ X 84″ SIDE DOOR W/FLUSH LOCK | $520.00 |
| 48″ X 78″ SIDE DOOR W/FLUSH LOCK | $487.50 |
| 48″ X 84″ SIDE DOOR W/FLUSH LOCK | $578.50 |
| RV TYPE 32″ X 66″ w/ WINDOW AND FULL SCREEN DOOR BLACK OR WHITE | $1,059.50 |
| RV TYPE 36″ X 78″ w/ WINDOW AND FULL SCREEN DOOR BLACK OR WHITE | $1,085.50 |
| RV TYPE 48″ X 78″ w/ WINDOW AND FULL SCREEN DOOR BLACK OR WHITE | $1,189.50 |
| *** FOR COLOR ADD $10.00 | |
| 4′ RAMP IN V-NOSE (7′, 8′ & 8.5′ WIDES ONLY) | $611.00 |
| *** MAXIMUM CLEARANCE 4′ RAMP: 6′ | |
| 5′ RAMP IN V-NOSE UP TO 6’6″ CLEARANCE (8.5′ WIDES ONLY) | $741.00 |
| *** MAXIMUM CLEARANCE 5′ RAMP: 6’6″ W/O HEAVY DUTY SPRING | |
| 5′ RAMP IN V-NOSE W/HD SPRING ASSIST 7′-8′ CLEARANCE (8.5′ WIDES ONLY) | $1,066.00 |
| *** MAXIMUM CLEARANCE 5′ RAMP W/ HEAVY DUTY SPRING: 8′ *CALL FOR AVAILABILITY* | |
| STEPS: | |
| PULL OUT RV STEP **IF SHIPPING ON WEDGE, MUST SHIP LOOSE** (NOT RECOMMENDED) | $208.00 |
| RAMP DOOR UPGRADES: | |
| UPGRADED MEDIUM DUTY RAMP W/DOUBLE TUBING (6′ & 7′ WIDES) 3000# | $487.50 |
| EXTRA HEAVY DUTY – DOUBLE TUBING & 1/4″ ANGLE (NO PADS) | $494.00 |
| *** 5000# UP TO 18″ ADDITIONAL HEIGHT (8.5′ WIDES ONLY) | |
| SUPER DUTY – DOUBLE TUBING, 1/4″ ANGLE & HEAVY DUTY SPRING ASSIST W/ PADS | $715.00 |
| *** 6000# REQ’D FOR 24″ ADDITIONAL HEIGHT OR MORE (8.5′ WIDES ONLY) | |
| *** HEAVY DUTY SPRING ASSISTS: CALL FOR AVAILABILITY | |
| 48″ RAMP SIDE DOOR ILO STD SIDE DOOR | $325.00 |
| 48″ RAMP SIDE DOOR IN ADDITION TO STD SIDE DOOR | $455.00 |
| *** MAXIMUM CLEARANCE 48″ RAMP: 6′ | |
| 60″ RAMP SIDE DOOR ILO STD SIDE DOOR UP TO 6’6″ CLEARANCE | $455.00 |
| 60″ RAMP SIDE DOOR IN ADDITION TO STD SIDE DOOR UP TO 6’6″ CLEARANCE | $585.00 |
| *** MAXIMUM CLEARANCE 60″ RAMP: 6’6″ W/O HEAVY DUTY SPRING | |
| 60″ RAMP SIDE DOOR W/HD SPRING ASSIST ILO STD SIDE DOOR 7′-8′ CLEARANCE | $780.00 |
| 60″ RAMP SIDE DOOR W/HD SPRING ASSIST IN ADDITION TO STD SIDE DOOR 7′-8′ CLEARANCE | $910.00 |
| *** MAXIMUM CLEARANCE 60″ RAMP W/ HEAVY DUTY SPRING: 8′ *CALL FOR AVAILABILITY* | |
| PORCHES: (8.5′ WIDES ONLY) | |
| *PORCHES INCLUDE .024 METAL CEILING – SPECIFY COLOR | |
| BBQ TRAILER w/ 6′ OPEN PORCH w/ ATP FLOORING | $585.00 |
| BBQ TRAILER w/ 6′ OPEN PORCH w/ EXPANDED METAL FLOORING | $650.00 |
| BBQ TRAILER w/ 6′ SOLID HALF WALL PORCH w/ EXPANDED METAL FLOORING | $910.00 |
| BBQ TRAILER w/ 8′ OPEN PORCH w/ ATP FLOORING | $682.50 |
| BBQ TRAILER w/ 8′ OPEN PORCH w/ EXPANDED METAL FLOORING | $780.00 |
| BBQ TRAILER w/ 8′ SOLID HALF WALL PORCH w/ EXPANDED METAL FLOORING | $1,170.00 |
| BBQ TRAILER w/ 10′ OPEN PORCH w/ ATP FLOORING | $806.00 |
| BBQ TRAILER w/ 10′ SOLID HALF WALL PORCH w/ ATP FLOORING | $1,144.00 |
| ADD DOOR TO PORCH (SEE EXTRA DOOR PRICING) | |
| ATP ON PORCH CEILING | $325.00 |
| 36″ RAILS ON PORCH (INCLUDES (1) GATE W/STEPWELL & REMOVEABLE REAR RAIL) | $390.00 |
| ROOFS: | |
| ROUND TOP ROOF W/BLACK/WHITE FRONT CAP (6′ & 7′ WIDES ONLY) – CURRENTLY N/A | N/A |
| ROUND TOP ROOF W/BLACK/WHITE FRONT CAP (8′ & 8.5′ WIDES ONLY) – CURRENTLY N/A | N/A |
| WALK ON ROOF INCLUDES THE FOLLOWING: ***CALL FOR AVAILABILITY*** | $52.00 |
| *** FLAT TUBE ROOF BOWS 12″ OC, 3/4″ PLYWOOD w/ 1 PIECE ROOFING -PRICE PER LTF | |
| WALK ON ROOF w/ 42″ FOLD DOWN RAIL AND GATE INCLUDES THE FOLLOWING: ***CALL FOR AVAILABILITY*** | $71.50 |
| *** FLAT TUBE ROOF BOWS 12″ OC, 3/4″ PLYWOOD w/ 1 PIECE ROOFING -PRICE PER LTF | |
| ONE PIECE ALUMINUM ROOF -PRICE PER LTF ***CALL FOR AVAILABILITY*** | $26.00 |
| THERMA COOL CEILING LINER -PRICE PER LTF | $6.50 |
| *** WALK ON ROOF IS REQUIRED FOR OBSERVATION DECK *** | |
| 6′ X 6′ OBSERVATION DECK w/ 42″ COLLAPSIBLE RAILS (LADDER NOT INCL) | $1,625.00 |
| 8′ X 8′ OBSERVATION DECK w/ 42″ COLLAPSIBLE RAILS (LADDER NOT INCL) | $1,950.00 |
| 8′ X 12′ OBSERVATION DECK w/ 42″ COLLAPSIBLE RAILS (LADDER NOT INCL) | $2,860.00 |
| AWNINGS w/ HARDWARE: | |
| *** AWNINGS ARE ELECTRIC POWERED – MUST ADD 12V DEEP CYCLE BATTERY *** *** HARDWARE COLORS: BLACK OR WHITE *** AWNING COLORS: SOLID BLACK, WHITE FADE TO SILVER, WHITE FADE TO BURGUNDY, WHITE FADE TO BLACK, BLACK FADE TO WHITE, WHITE FADE TO BLUE, WHITE FADE TO SAND, WHITE FADE TO GREEN, BLACK FADE TO SAND |
|
| 8′ | $1,085.50 |
| 10′ | $1,170.00 |
| 12′ | $1,189.50 |
| 14′ | $1,215.50 |
| 16′ | $1,280.50 |
| 18′ | $1,326.00 |
| 20′ | $1,371.50 |
| 22′ INCLUDES CENTER SUPPORT | $1,605.50 |
| EXTRA ROOF VENTS, AC, HEATER, ETC. (NOT ILO): | |
| PLASTIC SIDE VENTS WHITE/BLACK (PAIR) | STD |
| NON-POWERED ROOF VENT | $39.00 |
| NON-POWERED ROOF VENT – ILO STANDARD PLASTIC SIDE VENTS (N/A 4′ WIDES) | $0.00 |
| SMOKE COLORED NON-POWERED ROOF VENT | $45.50 |
| 12V POWERED ROOF VENT | $58.50 |
| 110V POWERED ROOF VENT | $110.50 |
| MAXXAIR VENT COVER SHELL WHITE | $78.00 |
| BRACE FOR AC | $26.00 |
| WIRE AND BRACE FOR AC | $71.50 |
| 13500 BTU w/ HEAT STRIP **(REQUIRES WIRE & BRACE)** | $1,950.00 |
| 15000 BTU w/ HEAT STRIP (REQUIRES WIRE & BRACE) | $2,242.50 |
| WIRE AND BRACE ONLY FOR HOOD VENT | $325.00 |
| SIDEWALL VENT 2-WAY ALUMINUM/BLACK (SET OF 2) | $65.00 |
| SIDEWALL VENT 2-WAY ALUMINUM/BLACK (SET OF 2) – ILO STANDARD | $39.00 |
| ELECTRIC BASEBOARD HEATER w/ THERMOSTAT 30″ | GET QUOTE |
| ELECTRIC BASEBOARD HEATER w/ THERMOSTAT 48″ | GET QUOTE |
| PACKAGES: | |
| BLACK OUT PACKAGE (DOES NOT INCLUDE SMOKE COLORED RV OR BLACK TIRES): INCLUDES: ALL BLACK TRIM, BLACK ATP FENDERS, BLACK DOOR TRIM, BLACK STONEGUARD & NOSEGUARD, BLACK ATP STEPWELL (8.5′ WIDES ONLY), BLACK BARLOCK W/BLACK HASP ON RAMP DOOR |
PRICE PER SIZE: |
| 4′, 5′ & 6′ WIDES | $422.50 |
| 7′ WIDES | $435.50 |
| 8′ & 8.5′ WIDES | $448.50 |
| ELECTRIC PACKAGE (SPECIFY 30 AMP / 50 AMP): INCLUDES: 2 RECEPTACLES, (1) 110V SWITCH, (2) 110V 24″ FLAT PANEL LED’S, 60 AMP PANEL BOX W/LIFELINE (UP TO (3) 20 AMP BREAKERS) |
$520.00 |
| ***IF NOT GETTING CEILING LINER, ADD $50 FOR BACKERS ON 24″ LED’S ($25/EA)*** | $65.00 |
| FULL BATHROOM PACKAGE (REQ’S MIN OF 6′) (SMALLEST SIZE 8.5X16TA): INCLUDES: COMPLETE WATER PACKAGE W/WASTE TANK, 8″ MAIN FRAME, TOILET, 24×24 SHOWER W/SURROUND, HAND WASH SINK (PLASTIC DROP-IN), 3′ BASE CABINET, PARTITION WALL W/WHITE METAL & 24″ DOOR, COVER ALL PLUMBING & TANK W/METAL, 24″ 110V FLAT PANEL LED LIGHT, 110V POWERED RV |
$3,380.00 |
| *** UPGRADE TO 32×32 SHOWER (IPO 24×24 IN FULL BATH PKG) | $195.00 |
| HALF BATHROOM PACKAGE (REQ’S MIN OF 4′): INCLUDES: COMPLETE WATER PACKAGE W/WASTE TANK, 8″ MAIN FRAME, TOILET, HAND WASH SINK (PLASTIC DROP-IN), 3′ BASE CABINET, PARTITION WALL W/WHITE METAL & 24″ DOOR, COVER ALL PLUMBING & TANK W/METAL, 24″ 110V FLAT PANEL LED LIGHT, 110V POWERED RV |
$2,762.50 |
| MOTORCYCLE PACKAGE: INCLUDES: PAIR STABILIZER JACKS, (6) FLOOR D-RINGS, ALUM MAGS (STAR/SPIDER), ALUM/BLACK SIDE WALL VENTS, CHOICE OF 24″ ANO/ATP/COLORED METAL SIDES/REAR **SEE ADDT’L COST FOR TIRE SIZE** |
PRICE PER SIZE: |
| 5′ SINGLE AXLE | $650.00 |
| **6-LUG: +$55** 6′ SINGLE AXLE | $669.50 |
| **6-LUG: +$105** 6′ TANDEM AXLE | $988.00 |
| **6-LUG: +$55 / 8-LUG: +$170** 7′ SINGLE AXLE | $650.00 |
| **6-LUG: +$105 / 8-LUG: +$335** 7′ TANDEM AXLE | $988.00 |
| **6-LUG: +$105 / 8-LUG: +$335** 8′ TANDEM AXLE | $1,020.50 |
| **6-LUG: +$105 / 8-LUG: +$335** 8.5′ UP TO 24′ | $1,020.50 |
| **8-LUG: +$235** 8.5X26-8.5X32 | $1,059.50 |
| **8-LUG: +$350** 8.5X34 TRIPLE AXLE | $1,625.00 |
| RACE PACKAGE: INCLUDES: ATP/RTP FLOOR, ATP/RTP RAMP & FLAP, WHITE METAL WALLS & CEILING, BASE & OVERHEAD CABINET IN FRONT, (2) 12V LED EXTERIOR ANGLED RACING LIGHTS, (2) REAR EXTERIOR LED LOADING LIGHTS, ELECTRIC PACKAGE: (2) RECEPTS, (2) 24″ LED’S, (1) SWITCH, 60 AMP PANEL BOX W/LIFELINE, 12V CONVERTER |
PRICE PER SIZE: |
| 8.5′ UP TO 24′ | $3,900.00 |
| 8.5X26′ & UP | $4,290.00 |
| FRAME PREP FOR FUTURE WASTE TANK **REQ’S: 8″ MF & AXLE UPGRADE (SEE BELOW)** | $97.50 |
| REQUIRED FOR WATER PACKAGE: UPGRADE TO 8″ TUBE MAIN FRAME -PRICE PER LTF | $39.00 |
| *** 2-5/16″ COUPLER REQUIRED FOR SINGLE AXLE W/8″ TUBE MAIN FRAME | |
| WATER PACKAGE INCLUDE (8′ AND 8.5′ WIDES): **REQ’S: 8″ MF & AXLE UPGRADE** | $1,657.50 |
| *** 42GAL WATER TANK | |
| *** 52GAL HOLDING TANK | |
| *** PEX FRESH WATER PLUMBING AND PVC WASTE WATER PLUMBING | |
| *** 6GAL WATER HEATER | |
| *** WATER PUMP 115V | |
| *** CITY GRAVITY WATER CENTER | |
| WATER PACKAGE INCLUDE (6′ AND 7′ WIDES): **REQ’S: 8″ MF & AXLE UPGRADE** | $1,397.50 |
| *** 21GAL WATER TANK | |
| *** 33GAL HOLDING TANK | |
| *** PEX FRESH WATER PLUMBING AND PVC WASTE WATER PLUMBING | |
| *** 2.5GAL E-MAX WATER HEATER | |
| *** WATER PUMP 115V | |
| *** CITY GRAVITY WATER CENTER | |
| WATER PKG’S FOR SINGLE AXLE: REQ’S 16″ OC CROSSMEMBERS | |
| AXLE UPGRADE REQUIREMENT: 7X14TA & UNDER – CAN DENY RECOMMENDED AXLE UPGRADE | |
| AXLE UPGRADE REQUIREMENT: 7X16TA & UP – MINIMUM OF 5200 LB. AXLE(S) REQUIRED | |
| SINK AND FAUCET OPTIONS: | |
| STANDARD 2 BOWL 33″ X 22″ X 6″ STAINLESS STEEL DROP IN w/ 8″ FAUCET | $338.00 |
| 15″ X 15″ HAND WASH SINK (STAINLESS STEEL DROP IN w/ GOOSENECK FAUCET) | $214.50 |
| BATH SINK 17″ X 20″ PLASTIC DROP IN w/ 4″ FAUCET | $84.50 |
| DEEP 3 BOWL DROP IN STAINLESS STEEL w/ 10″ FAUCET DIS 3042 | $1,300.00 |
| DEEP 3 BOWL w/ DRAIN BOARDS STAINLESS STEEL w/10″ FAUCET CON-3-2D | $2,002.00 |
| DEEP 14″ 3 BOWL w/ DRAIN BOARDS STAINLESS STEEL w/ 12″ FAUCET HDS 3 2D | $2,080.00 |
| CABINETS OPTIONS: | |
| ALUMINUM .024 w/ 5/16″ SQ ALUMINUM TUBE FRAME | |
| 36″H BASE CABINET -PRICE PER FT | $130.00 |
| COUNTER TOP 3/4″ PLYWOOD w/ ALUMINUM INCLUDED W/BASE CAB PRICE | |
| ***FOR ATP BASE CABINET ADD $20 PER FT | $156.00 |
| ***FOR .030 METAL BASE CABINET ADD $10 PER FT | $143.00 |
| 18″H OVERHEAD CABINET -PRICE PER FT (**N/A W/SLANT V-NOSE OR ROUNDED V-NOSE**) | $97.50 |
| ***FOR ATP OVERHEAD CABINET ADD $20 PER FT | $123.50 |
| ***FOR .030 METAL OVERHEAD CABINET ADD $10 PER FT | $110.50 |
| FLOOR TO CEILING CABINET ANY DEPTH -PRICE PER FT (WIDE) | $227.50 |
| 4′ X 6′ UPGRADES: | |
| FROM 13″ TIRES TO 15″ TIRES (WHITE OR SILVER) w/15″ SMOOTH FENDERS | $104.00 |
| FROM 13″ TIRES TO 15″ TIRES (WHITE OR SILVER) w/15″ ATP FENDERS | $130.00 |
| STANDARD REAR DOOR TO RAMP DOOR | $260.00 |
| STRUCTURE: | |
| ADDITIONAL HEIGHT (REQUEST QUOTE FOR ANY HEIGHT NOT LISTED): | |
| 6’6″ INTERIOR HEIGHT (6′ & 7′ WIDES ONLY) -PER LTF | $15.60 |
| 7′ INTERIOR HEIGHT (6′ & 7′ WIDES ONLY) -PER LTF | $22.10 |
| 7’6″ INTERIOR HEIGHT (6′ & 7′ WIDES ONLY) -PER LTF | $28.60 |
| 8′ INTERIOR HEIGHT (6′ & 7′ WIDES ONLY) -PER LTF | $41.60 |
| 6″ ADDITIONAL HEIGHT (ALL EXCEPT 6′ & 7′) -PER LTF | $18.20 |
| 12″ ADDITIONAL HEIGHT (ALL EXCEPT 6′ & 7′) -PER LTF | $23.40 |
| 18″ ADDITIONAL HEIGHT (ALL EXCEPT 6′ & 7′) -PER LTF | $35.10 |
| 24″ ADDITIONAL HEIGHT (8.5′ ONLY) -PER LTF (REQ’S MINIMUM OF .030 UPGRADE) | $46.80 |
| 30″ ADDITIONAL HEIGHT (8.5′ ONLY) -PER LTF (REQ’S MINIMUM OF .030 UPGRADE) | $54.60 |
| 36″ ADDITIONAL HEIGHT (8.5′ ONLY) -PER LTF (REQ’S MINIMUM OF .030 UPGRADE) | $62.40 |
| 42″ ADDITIONAL HEIGHT (8.5′ ONLY) -PER LTF (REQ’S MINIMUM OF .030 UPGRADE) | $71.50 |
| *** 24″ OR MORE ADDT’L HEIGHT TO REAR RAMP REQ’S SUPER DUTY RAMP UPG (8.5′ ONLY) | |
| *** MAXIMUM RAMP CLEARANCE: 9′ / MAXIMUM DOUBLE DOOR CLEARANCE: 8′ | |
| REDUCED HEIGHT -PRICE PER LTF | $13.00 |
| REAR WING SPOILER W/ (3) PUCK LIGHTS (7′, 8′ OR 8.5′ WIDES ONLY) | $455.00 |
| 6 X 12 UPGRADE TO 4″ TUBE AND 3 1/2″ CXM | $117.00 |
| 6 X 12 UPGRADE TO 6″ TUBE AND 5 1/2″ CXM | $416.00 |
| 6 X 14 UPGRADE TO 6″ TUBE AND 5 1/2″ CXM | $474.50 |
| 7 X 12 UPGRADE TO 6″ TUBE AND 5 1/2″ CXM | $416.00 |
| 7 X 14 UPGRADE TO 6″ TUBE AND 5 1/2″ CXM | $474.50 |
| UPGRADE TO 8″ TUBE MAIN FRAME -PRICE PER LTF | $39.00 |
| *** 2-5/16″ COUPLER REQUIRED FOR SINGLE AXLE W/ 8″ TUBE MAIN FRAME | |
| UPGRADE TO 3″ 14GA TUBE CROSS MEMBERS -PRICE PER LTF | $32.50 |
| UPGRADE TO 4″ 14GA TUBE CROSS MEMBERS -PRICE PER LTF | $36.40 |
| UPGRADE TO 6″ 11GA TUBE CROSS MEMBERS -PRICE PER LTF | $49.40 |
| UPGRADE TO 8″ 3/16″ THICK TUBE CROSS MEMBERS -PRICE PER LTF | $110.50 |
| SLANTED V-NOSE W/MATCHING METAL ON SLANT ***CANNOT BE EXTENDED*** | $130.00 |
| SLANTED V-NOSE W/ATP ON SLANT ***CANNOT BE EXTENDED*** | $195.00 |
| FLAT FRONT (ALL EXCEPT 8.5′) | $0.00 |
| FLAT FRONT W/ANODIZED FRONT CORNERS (8.5′ WIDES ONLY) | $0.00 |
| BULL NOSE (ROUNDED V-NOSE) ***SPECIFY ROUND OR SQUARE CORNERS*** | $97.50 |
| 3′ V-NOSE (INCL EXT TTT AND SIDEWIND JACK) (6′, 7′, 8′ & 8.5′ WIDES ONLY) | $455.00 |
| 4′ V-NOSE (INCL EXT TTT AND SIDEWIND JACK) (7′, 8′, & 8.5′ WIDES ONLY) | $520.00 |
| 5′ V-NOSE (INCL EXT TTT AND SIDEWIND JACK) (8.5′ WIDES ONLY) | $552.50 |
| RECESSED BATTERY COMPARTMENT (12×12) | $156.00 |
| RECESSED TIRE COMPARTMENT – 8′ OR 8.5′ WIDES ONLY (33×33) | $208.00 |
| DECK OVER – NO LONGER AVAILABLE | N/A |
| OPTIONS: | |
| ACCESS LADDER | $162.50 |
| PER SECTION LADDER RACK (MIN OF 2 REQUIRED) -PRICE PER RACK | $182.00 |
| CUT DOWN LADDER RACKS LOW PROFILE | $65.00 |
| CABLE FLOOR HATCH ONLY (LIKE FOR LIFELINE) -EACH | $32.50 |
| PROPANE CAGE (TANK HOLDER) SPECIFY SIZE OF TANKS -PRICE PER CAGE | $305.50 |
| SHADOW BOX (UP TO 12″ DEEP / FINISHED IN CARPET / DOOR NOT INCLUDED) | $325.00 |
| 4′ HOOD VENT (INCLUDES WIRE & BRACE) | $4,686.50 |
| 6′ HOOD VENT (INCLUDES WIRE & BRACE) | $5,635.50 |
| 8′ HOOD VENT (INCLUDES WIRE & BRACE) | $6,812.00 |
| 10′ HOOD VENT (INCLUDES WIRE & BRACE) | $7,670.00 |
| HYBRID DECK TRAILER: (SPECIFY DECK SIZE / BOX SIZE) (MINIMUM SIZE: 7X16TA) W/ 2×6 PLANK FLOOR, 36″ RAILS & EXPANDED METAL REAR FOLD-DOWN GATE RAMP |
$1,300.00 |
| HARLEY DAVIDSON DECALS (SPECIFY BLK/ORANGE OR BLK/SILV) INCLUDES 3 | $318.50 |
